Skip to content
AI for businessFor building ownersHow it worksPricingResearchCompany
Let’s talk
AI for businessFor building ownersHow it worksPricingResearchCompanyLet’s talk
On this pageQuestionsWho does whatHosting modelFAQ

For building owners / Housing society

Every flat pays for load the society never draws.

The common connection is sanctioned for every lift, pump and corridor light at once, and drawn at a fraction of that. A spare ground-floor room may support an installation. An assessment and the society's agreement determine suitability, responsibilities and payment.

Request a property assessmentWhat to check first

Which building is yours?

  • Office building
  • Warehouse
  • Mall or retail space
  • Factory
  • Industrial estate
  • Hotel
  • School or college
  • Co-working operator
  • Cold storage
  • Housing society
  • Hospital campus
  • IT park

For housing societies

The common bill has a fixed charge nobody voted for.

The society's connection was sized for lifts, pumps, the club house and the corridor lights all at once. The draw is a fraction of it, the fixed charges cover the whole figure, and they are split across the maintenance bills every month. Meanwhile a ground-floor room the builder handed over has been a store for old furniture since possession.

Where the room usually is

A ground-floor room the builder handed over and nobody fitted out, the gym that never opened, a store off the club house, or a room beside the meter room that holds old furniture. It has to be common property on the common connection, and the society's general body has to agree to license it.

What the load does

The common connection is sanctioned for every lift, every pump, the club house and the corridor lights running together, and drawn at a fraction of that on any ordinary evening. The spare is the sanctioned figure on the common bill minus the twelve-month peak, and the assessment reads the bills with the secretary and the society's electrician. Individual flats' connections are not part of the assessment.

The assessment confirms the supply, tie-in and cooling an installation needs, and what your room can support.

Eligibility

Questions to answer first.

What decides whether a room in a housing society can be assessed for an installation, and what the assessment then checks on site.

Before the assessment

  1. Is the room common property on the common connection?

    Only common property on the society's own connection is a starting point. Flats' connections are not.

  2. Will the general body take it up?

    The managing committee takes a proposal to the general body, and the society signs only after its resolution.

  3. Is the room away from the nearest flat and from play areas?

    Distance, the sound at the door and access are checked in the room with the committee.

What the assessment checks

  • The common connection's metering point and sanctioned figure, read against twelve months of common bills
  • Panel headroom in the common LT panel for the tie-in an installation needs, and the run to the room
  • Cooling on the room, sized for the installation, since a store with no unit cannot reject the heat
  • Fire NOC currency for the building
  • The door, the neighbours and the sound at the door: a room that locks, away from the nearest flat, checked with the committee standing in it

The general guide to the initial requirements is on the owners page.

Operating considerations

Running an installation in a housing society.

Residents and the committee

Visits are arranged through the secretary, and the committee sees the room, the route and the sound at the door during the assessment.

Safety near homes

Safety for the installation and the room is assessed for the site. The trust page sets out Azita's approach to safety in buildings.

The trust page↗

A decision the society can revisit

What happens if the society changes its mind, including notice and removal, is set out in the agreement the general body is asked to approve.

Responsibilities

Who does what?

What Azita does, and what is confirmed in your agreement.

Who does what for an installation
ResponsibilityAzitaBuilding owner or customerConfirmed in your agreement
DesignAzita
InstallationAzita
CommissioningAzita
OperationAzita
MeteringAzita
FundingConfirmed in your agreement
Equipment ownershipConfirmed in your agreement
Room preparationConfirmed in your agreement
PowerConfirmed in your agreement
CoolingConfirmed in your agreement
ConnectivityConfirmed in your agreement
AccessConfirmed in your agreement
MaintenanceConfirmed in your agreement
RemovalConfirmed in your agreement

Azita designs, installs, commissions, operates and meters. Everything else varies by arrangement and is confirmed in your agreement, including what a building owner or customer provides.

Hosting model

Explore the hosting model.

The same illustration as on the owners page, opened at typical inputs for a housing society. Its assumptions sit beside the result; the assessment and your agreement establish the actual terms.

Open the hosting model example
kW

Your sanctioned load minus your peak draw, from 15 to 200 kW.

One pod per room. Store rooms and plant rooms count.

Room size
Building cooling can take the heat

Indicative pods from your room and power inputs

1

1 × 10 kW pods, 14.4 kW at the meter of your 20 kW

Counted from your room count and available power only. Room size and cooling are context for the assessment; they do not confirm that equipment fits.

Base payment assumed in this example
₹4.87 La year, ₹40,583 a month
Additional payment at the modelled duty Modelled, not yet measured
₹7.2 La year, ₹60,000 a month
Total in this example
₹12.07 La year, ₹1.01 L a month
  • Without building cooling the assessment checks whether one 5 TR room unit per pod can be fitted. The estimate stands only if it can.

Assumptions in this example

  • Base payment: ₹4.87 L per pod per year.
  • Additional payment: ₹7.2 L per pod per year at the modelled duty, capped at ₹15 L to ₹18 L per pod per year.
  • One pod per room that locks, and about 14.4 kW of spare sanctioned load per pod at the meter.
  • Electricity is not in these figures. How it is metered and settled is confirmed in your agreement.
  • Model version: host-yield-v1.
  • An illustration of the hosting model, not a site approval or a promised payment.
Request a property assessment↗

Illustrative model, not a site-specific offer or measured earnings. It applies to hosting for others; an installation for your own work needs its own proposal.

Questions housing societies ask.

Who decides, and who signs?+

The society. The managing committee takes it to the general body, and the society signs after the resolution. The assessment sets out what the agreement needs from the society.

Will residents hear it?+

It sits in a locked room and gives its heat to the room's cooling. Whether the sound at the door is acceptable is checked in the room, with the committee standing there, before anything is signed.

Is it safe next to where children play?+

The room is chosen away from play areas, and it locks. Safety for the installation is assessed for the site, and the trust page sets out Azita's approach to safety in buildings.

The trust page↗
Does it affect the flats' own electricity?+

The assessment looks only at the society's common connection. How the installation's electricity is metered and settled is confirmed in the society's agreement.

Related buildings

  • Office buildingAn office building is sanctioned for a load it draws only in working hours. A locked store room on that margin may support an Azita installation, subject to assessment and agreement.
  • School or collegeA campus is sanctioned for every classroom AC and lab at once, and empties at 3 pm and for the vacation. A locked room on that margin may support an Azita installation, subject to assessment and agreement.
  • Co-working operatorA flex floor is sanctioned for every desk taken and drawn at the occupancy the month brought. An unlet cabin on that margin may support an Azita installation, subject to assessment and agreement.

Property assessment

Start with your society.

The form starts with “Housing society” as the building type, and you can change it. A location and a short description are enough to start.

Tell us about your property.

Share a few details. We’ll help assess the space and explain what an installation would involve.

Included with your enquiry

  • Building typeHousing society
Add a phone number or a few details (optional)

We’ll use these details to respond to your enquiry. Privacy policy

Prefer email? hello@azitalabs.com ↗

AI factories in buildings that already have power.

Platform

  • How it works
  • RackQuilt
  • Token Mills
  • AzExchange

For buyers

  • AI for business
  • Voice agents for BFSI floors
  • Private coding pods
  • Hospitals and diagnostics
  • VFX assist for post houses
  • Promo and product clips
  • Creators
  • Agencies
  • Engineering
  • Finance
  • Healthcare & BFSI

For buildings

  • Estates
  • For building owners

Tools

  • Pricing
  • Room illustrations

Proof

  • Trust & compliance
  • Sources
  • Research

Company

  • Company
  • Team
  • Careers
  • Press
  • Investors
  • Contact
AI enquirieshello@azitalabs.comProperty enquirieshello@azitalabs.com

© 2026 Azita Labs Private Limited

PrivacyTermsHosting terms

New Delhi, India