Skip to content
AI for businessFor building ownersHow it worksPricingResearchCompany
Let’s talk
AI for businessFor building ownersHow it worksPricingResearchCompanyLet’s talk
On this pageQuestionsWho does whatHosting modelFAQ

For building owners / Warehouse

Sanctioned for the peak shift. Spare after it.

A warehouse is sanctioned for docks, chargers and lights running at once, and draws that only when dispatch peaks. One locked room on that margin may support an installation. An assessment and your agreement determine suitability, responsibilities and payment.

Request a property assessmentWhat to check first

Which building is yours?

  • Office building
  • Warehouse
  • Mall or retail space
  • Factory
  • Industrial estate
  • Hotel
  • School or college
  • Co-working operator
  • Cold storage
  • Housing society
  • Hospital campus
  • IT park

For warehouses

Your load was sized for the busiest hour of the year.

Conveyors, dock levellers, a bank of forklift chargers, high-bay lights and whatever cooling the office block has: the sanctioned load was set for all of it at once, and the fixed charges for that figure arrive every month. Outside the peak shift most of it sits idle, and idle sanctioned load sits unused.

Where the room usually is

A store room beside the security cabin, a returns or documentation room off the dock, a mezzanine office that was never fitted out, or a locked cage that can become a room. Warehouses have space; what they are short of is a room that locks, stays clean and has cooling of its own, so the assessment looks for those three before anything else.

What the load does

Sanctioned for docks, conveyors, high-bay lighting and a forklift charging bank running together, and drawn that hard only in the peak shift. If the chargers run at night the daytime draw is a fraction of the sanctioned figure; if they run by day the night is spare. The gap between the figure on your bill and your twelve-month peak is the spare, and the assessment reads the bills with you.

The assessment confirms the supply, tie-in and cooling an installation needs, and what your room can support.

Eligibility

Questions to answer first.

What decides whether a room in a warehouse can be assessed for an installation, and what the assessment then checks on site.

Before the assessment

  1. Is there a room that locks, stays clean and can be cooled on its own?

    Warehouses have space; the assessment looks for a room with those three before anything else.

  2. Is the connection the unit's own, or the park's?

    It decides who holds the margin and whose signature the agreement needs.

  3. When do your forklift chargers run?

    Charging hours move your peak, and the spare is your sanctioned load minus that peak.

What the assessment checks

  • The metering point, and whether the unit's connection is its own or the park's
  • Panel headroom for the tie-in an installation needs, and the run from the panel to the room
  • Floor loading and a door that locks: if the room is on a mezzanine, the assessment checks the deck carries the cabinet before a design is drawn
  • Cooling of its own: a warehouse hall cannot reject an installation's heat, so the room needs its own unit, and the assessment sizes it
  • Fire NOC currency, and dust kept outside the room

The general guide to the initial requirements is on the owners page.

Operating considerations

Running an installation in a warehouse.

Dock traffic

Rooms are chosen away from dock and forklift traffic, and visits are planned around dispatch peaks.

Heat and dust

A warehouse hall cannot reject an installation's heat or keep dust out, so the room needs cooling of its own and a door that shuts.

Mezzanines and floor loading

A mezzanine can work only if the deck carries the cabinet. A ground-floor store room is the simpler answer where one exists.

Responsibilities

Who does what?

What Azita does, and what is confirmed in your agreement.

Who does what for an installation
ResponsibilityAzitaBuilding owner or customerConfirmed in your agreement
DesignAzita
InstallationAzita
CommissioningAzita
OperationAzita
MeteringAzita
FundingConfirmed in your agreement
Equipment ownershipConfirmed in your agreement
Room preparationConfirmed in your agreement
PowerConfirmed in your agreement
CoolingConfirmed in your agreement
ConnectivityConfirmed in your agreement
AccessConfirmed in your agreement
MaintenanceConfirmed in your agreement
RemovalConfirmed in your agreement

Azita designs, installs, commissions, operates and meters. Everything else varies by arrangement and is confirmed in your agreement, including what a building owner or customer provides.

Hosting model

Explore the hosting model.

The same illustration as on the owners page, opened at typical inputs for a warehouse. Its assumptions sit beside the result; the assessment and your agreement establish the actual terms.

Open the hosting model example
kW

Your sanctioned load minus your peak draw, from 15 to 200 kW.

One pod per room. Store rooms and plant rooms count.

Room size
Building cooling can take the heat

Indicative pods from your room and power inputs

1

1 × 10 kW pods, 14.4 kW at the meter of your 50 kW

Counted from your room count and available power only. Room size and cooling are context for the assessment; they do not confirm that equipment fits.

Base payment assumed in this example
₹4.87 La year, ₹40,583 a month
Additional payment at the modelled duty Modelled, not yet measured
₹7.2 La year, ₹60,000 a month
Total in this example
₹12.07 La year, ₹1.01 L a month
  • Rooms set the count: one pod per room that locks. Your load would carry 3 pods at 14.4 kW each at the meter.
  • Without building cooling the assessment checks whether one 5 TR room unit per pod can be fitted. The estimate stands only if it can.

Assumptions in this example

  • Base payment: ₹4.87 L per pod per year.
  • Additional payment: ₹7.2 L per pod per year at the modelled duty, capped at ₹15 L to ₹18 L per pod per year.
  • One pod per room that locks, and about 14.4 kW of spare sanctioned load per pod at the meter.
  • Electricity is not in these figures. How it is metered and settled is confirmed in your agreement.
  • Model version: host-yield-v1.
  • An illustration of the hosting model, not a site approval or a promised payment.
Request a property assessment↗

Illustrative model, not a site-specific offer or measured earnings. It applies to hosting for others; an installation for your own work needs its own proposal.

Questions warehouse owners ask.

Is a warehouse hall too hot or too dusty?+

The hall itself is not the place for it. The room around the installation has to be a room: a door that shuts, cooling of its own, dust kept outside. That is what the assessment checks.

Can it go on the mezzanine?+

If the deck carries it. The assessment checks floor loading before a design is drawn, and a ground-floor store room is the simpler answer where one exists.

Our forklift chargers run at night. Does that matter?+

Only to the arithmetic. The spare is your sanctioned load minus your twelve-month peak, whenever that peak falls. How the installation gives way if the chargers need headroom is confirmed in your agreement.

There is no AC in the warehouse. Can we still host?+

The room needs cooling that can take the heat of the installation. The assessment checks whether the room can take a unit of its own.

Related buildings

  • Cold storageA cold store is sanctioned for every compressor at full load in peak summer, and draws less most of the year. A dry, locked side room may support an Azita installation, subject to assessment and agreement.
  • Industrial estateAn industrial estate has many units and rooms that were never let. Larger sites can host several installations, each room assessed and each set out in the agreement.
  • FactoryA factory is sanctioned for every machine running at once and draws that only on a full shift. A locked store room on that margin may support an Azita installation, subject to assessment and agreement.

Property assessment

Start with your warehouse.

The form starts with “Warehouse” as the building type, and you can change it. A location and a short description are enough to start.

Tell us about your property.

Share a few details. We’ll help assess the space and explain what an installation would involve.

Included with your enquiry

  • Building typeWarehouse
Add a phone number or a few details (optional)

We’ll use these details to respond to your enquiry. Privacy policy

Prefer email? hello@azitalabs.com ↗

AI factories in buildings that already have power.

Platform

  • How it works
  • RackQuilt
  • Token Mills
  • AzExchange

For buyers

  • AI for business
  • Voice agents for BFSI floors
  • Private coding pods
  • Hospitals and diagnostics
  • VFX assist for post houses
  • Promo and product clips
  • Creators
  • Agencies
  • Engineering
  • Finance
  • Healthcare & BFSI

For buildings

  • Estates
  • For building owners

Tools

  • Pricing
  • Room illustrations

Proof

  • Trust & compliance
  • Sources
  • Research

Company

  • Company
  • Team
  • Careers
  • Press
  • Investors
  • Contact
AI enquirieshello@azitalabs.comProperty enquirieshello@azitalabs.com

© 2026 Azita Labs Private Limited

PrivacyTermsHosting terms

New Delhi, India